Window Tinting Film Tools / Outils de Film de Fenêtre / Attrezzi Della Pellicola Della Finestra / Fensterfilmwerkzeuge
Herramientas de la Película de la Ventana / Ferramentas da Película da Janela / Cam Filmi Uygulama Aletleri

Tint Tools

Tool Code

Name

Photo

(Click on the Picture)

Auto(A)

Flat Glass(F)

Paint Protection (P)


Description

SQUEEGEES film uygulama ragleler
ACT1000

4" (10cm) Universal Squeegee

A,F

Combination squeegee/hard card used as a finishing tool during film installation. When wrapped in a layer of cotton fabric or lint-free paper towel it can be used for wicking water out along borders (after an installation) or used for sweeping film flush to the glass during heat forming procedures. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener or the ribs on the toll itself.
ACT1001

The Conqueror Tool - Yellow Blade

A

Re-designed version of the Conqueror with more secure urethane blade attachment.
ACT1001B

The Conqueror Tool- Blue Blade

A

Blue urethane blue is slightly harder that the yellow version above.
ACT1002

12" (30cm) Block Squeegee

 

A

Combination squeegee/hard card used as a finishing tool during film installation. Hard edge, when wrapped in a layer of cotton fabric or lint-free paper towel, can be used for wicking water out along borders (after an installation). Can be cut to various angle shapes to reach tight, sharp cornered glass areas. Hard-edge sharpness can be maintained by using ACT1015 Hard Card Sharpener.
ACT1003

4" (10cm) Blue Bondo Squeegee

A

Combination squeegee/hard card used as a finishing tool during film installation. When wrapped in a layer of cotton fabric or lint-free paper towel it can be used for wicking water out along borders (after an installation) or used for sweeping film flush to the glass during heat forming procedures. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener or the ribs on the toll itself..
ACT1004

4" (10cm) 3M Gold Squeegee

A,F

Combination squeegee/hard card used as a finishing tool during film installation. When wrapped in a layer of cotton fabric or lint-free paper towel it can be used for wicking water out along borders (after an installation) or used for sweeping film flush to the glass during heat forming procedures. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener or the ribs on the toll itself..
ACT1005

4" (10cm) Yellow Lidco Squeegee
 

A,F

Combination squeegee/hard card used as a finishing tool during film installation. When wrapped in a layer of cotton fabric or lint-free paper towel it can be used for wicking water out along borders (after an installation) or used for sweeping film flush to the glass during heat forming procedures. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener or the ribs on the toll itself..
ACT1006

8" (20cm) Red Devil Squeegee

A,F

High durometer angled squeegee: great for carding out moisture into corners. Can be used directly on film surface without scratching. 
ACT1007

6" (15cm) Block Squeegee

A,F

Combination squeegee/hard card used as a finishing tool during film installation. Hard edge, when wrapped in a layer of cotton fabric or lint-free paper towel, can be used for wicking water out along borders (after an installation). Can be cut to various angle shapes to reach tight, sharp cornered glass areas. Hard-edge sharpness can be maintained by using ACT1015 Hard Card Sharpener.
ACT1008

Bondo Squeegee

A,F

Soft, pliable plastic allows this tool to be used to temporarily pull back rub rails during film installation of door glass or used like a squeegee to anchor film to glass during pattern cutting. Another use is for sweeping film flush to the glass surface during heat forming procedures instead of using the hand.
ACT1009

Clear Super Squeegee-Large

A

Combination squeegee/hard card used as a finishing tool during film installation. When wrapped in a layer of cotton fabric or lint-free paper towel it can be used for wicking water out along borders (during glass cleaning or after an installation). Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener. Hard but flexible & about 6 inches wide, has great "scooping" action for direct "contour" squeegeeing of film in lower corners of rear windows. VERY nice tool.
ACT1010

Clear Super Squeegee-Regular

A

Combination squeegee/hard card used as a finishing tool during film installation. When wrapped in a layer of cotton fabric or lint-free paper towel it can be used for wicking water out along borders (during glass cleaning or after an installation).
ACT1011

Gasket Push Stick

A

Used for pressing out minor film creases or crimps and retrieving tucked gaskets.
ACT1012

Green (Soft) Diamond Tip Hard Card Squeegee

A,F

High durometer angled squeegee: great for carding out moisture into corners. Can be used directly on film surface without scratching. Many installers find this tool replaces many of the standard functions of the white Teflon Hard Card. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener.
ACT1013

Lil’ Chizler

A,F,P

A much harder tool than the Teflon edge tool, this plastic device is used for the occasional "press-down" of small film creases, or scraping away old film remnants on scratch-sensitive surfaces. Its sharpness allows one to get under border gaskets, and press down stubborn "fingers." Caution must be exercised because of the possibility of scratching film.
ACT1014

Red (Medium) Diamond Tip Hard Card Squeegee

A,F

High durometer angled squeegee: great for carding out moisture into corners. Can be used directly on film surface without scratching. Many installers find this tool replaces many of the standard functions of the white Teflon Hard Card. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener.
ACT1015

Hard Card Sharpener

A,F

This sharpening tool is essential for maintaining the sharpest, smoothest possible edge on any thin, "hard edge" tool, such as the Teflons and Diamond Tips. Saves money by extending the life of these tools by more than a hundred-fold. Has replaceable blade: just use a few segments a stainless steel Ofla blade, remove and replace with screw driver underneath. An amazing tool which works like a wood plane.
ACT1016

Shuttle (Extended Hard Hard)

A

About 10" (25 cm) long. Hard card able to reach into tight areas located at the bottom edge of rear window glass. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener. Name derives for the profile similar to the Space Shuttle.
ACT1017

Slammer (Handled Hard Card)

A

Used as a hard card-finishing tool for a variety of installation challenges. When wrapped in a layer of cotton fabric or lint-free paper towel, it is used for a) cleaning into corners and along edge gaskets (during glass preparation), b) wicking water out along borders (after an installation), and c) direct squeegeeing of film along borders without any wrapping. Moreover, it can be used for d) easily reaching the lower portion of rear window glass, e) temporarily pulling back rub rails or, f) to reach into sharp angled corners. It is extremely hard, yet (if clean) will not scratch film. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener.
ACT1018

Teflon Edge Squeegee (Black 2000)

A,F

The Teflon Black 2000 Card gives the greatest gripping power of the trio of White, Gold and Black cards. The white card gives the least friction-grip on film (vital in many situations); the Gold the next level, and the Black the highest grip strength on film surface, all without damage to SR films. Fantastic tool for water & bubble extraction, film manipulation during heat forming, border checking, and gasket retraction. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener.
ACT1019

 

 

Teflon Edge Squeegee (White)

A,F

While not actually made of Teflon, this tool is often called the Teflon "hard-card" or "edge tool." It is an essential tool for every installer in every installation situation. When wrapped in a layer of cotton fabric or lint-free paper towel, it is used for a) cleaning into corners and along edge gaskets (during glass preparation), b) wicking water out along borders (after an installation). Moreover, it can be used for c) direct squeegeeing of film along borders without any wrapping, and d) edge trimming by using it as a blade-guide, creating a uniform tiny gap between the film edge and the perimeter gasket or frame. Finally, e) it's used to retract gaskets to slip underneath. It is extremely hard, yet (if clean) will not scratch SR-coated film. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener. Installers often cut down the tool beginning at the middle top in a straight line to the lower right corner. This angularity allows the tool to penetrate into corners for cleaning and squeegeeing purposes.
ACT1020


 

Teflon Edge Squeegee (Gold 2000) GT086-GLDs.JPG (5066 bytes)

A,F

The Teflon Gold 2000 and Black card (see next item below) eliminate the need, in the eyes of many installers, for ACT1000, 1003, 1004, AND 1005. Made from same mold as the Teflon Edge Squeegee (ACT1019) but with material that is more resistant to thermal deformation. The Gold card provides more friction on film for better gripping during the heat forming process and superb water extraction during squeegeeing. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener.
ACT1021

Yellow (Hard) Diamond Tip Hard Card Squeegee

A,F

High durometer angled squeegee: great for carding out moisture into corners. Can be used directly on film surface without scratching. Many installers find this tool replaces many of the standard functions of the white Teflon Hard Card. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener.
ACT1023 (Red-Medium)

Little Foot Squeegee (Red-Medium)

A

Automotive hardcards (same as the Big Foot squeegee, but without the handle). Excellent for use as an angled, general purpose hard card during cleaning and finishing out. Note the 3 different colors and levels of hardness.
ACT1025

Teflon Edge Squeegee (Platinum)

A,F

This platinum-colored "hard card" squeegee adds to the lineup of white, gold, and, black Teflon Edge Tools. The Platinum card is stiffer than the white card and has the gripping power of the Black card, and has many uses in flat glass and auto installation, including border trimming, edge "bumping," direct squeegeeing, and gasket retraction. Edge sharpness can be maintained by using fine grit sandpaper, but not the Hard Card Sharpener.
ACT1026

Slim Foot Squeegee

A

Like the Big Foot but without the ribs along the triangular sides, this 16" long automotive hard card tool can easily reach the greatest distances to the bottom edges of rear windows--and now even behind brake lights and other obstacles. Has vinyl-grip handle. Can be used directly on film surfaces for maximum solution extraction.
ACT1027 (Blue-Soft)

Little Foot Squeegee (Blue-Soft

A

Automotive hardcards (same as the Big Foot squeegee, but without the handle). Excellent for use as an angled, general purpose hard card during cleaning and finishing out. Note the 3 different colors and levels of hardness.
ACT1028 (Black-Hard)

Little Foot Squeegee (Black-Hard)

A

Automotive hardcards (same as the Big Foot squeegee, but without the handle). Excellent for use as an angled, general purpose hard card during cleaning and finishing out. Note the 3 different colors and levels of hardness.
ACT1029

The Edge

 

 

A,F

Use for auto gasket retraction to install film below gasket; trim guide for flat glass; "bumping" tool for flat glass.

10-inch/25cm length. Photos for ...
a. Auto use
b.
Flat Glass

ACT1030

Blue Teflon Card

A,P

This soft Teflon Card is an ideal tool for the installation of Venture Shield Paint Protection Film. Use firm drag strokes at a very low angle for maximum moisture extraction and quick tack without damaging the soft urethane film. Can be cut easily to narrower widths as desired.
ACT1031

Yellow Squeegee (Hard)

A

Great for squeegeeing film into curved glass areas, especially strongly contoured rear panes.
ACT1032

Green Squeegee (Soft)
PPF Pattern-Making

P

An ideal tool for applying PPF pattern-making transfer paper to auto body surfaces to enhance the accuracy of special patterns.
ACT1033
(Black)

 

 

6" (15cm) Teflon Squeegee (Black)

A,F

Extra large version of black and Teflon Squeegee ACT1018 shown above.
ACT1034
(White)

6" (15cm) Teflon Squeegee (White)

A,F

Extra large version of white Teflon Squeegee ACT1019 shown above.
ACT1035

EZ-Reach Hard Card

A

Great "hard-card" type squeegee tool for hard-to-reach corners.
ACT1036

4" Teflon Squeegee (Pink)

A,F

Its durometer is between the white and gold Teflon squeegees.
ACT1037

Platinum EZ Reach 

A

This unique hard card auto squeegee is quite effective at reaching edges in tight spots such as port windows of sedan rear doors. Stiffer than its softer sister (Gold EZ Reach), you will find the Platinum EZ Reach—when towel-wrapped—will let you clean hard-to-reach edges more effectively. And when installing sputtered films, this tool works better as a bare squeegee tool to maximize water removal to shorten film cure time in those same tight areas. The tool measures 6¾” (15.5cm) on the long side.
ACT1038

Quick Foot

A

The Quick Foot is smaller than the similarly-shaped Slim Foot and measures only 9½” (24cm) on the long side. This hard card has a very thin edge to better slip between the glass and tight lower gaskets on side windows to pry them back, allowing film edges to drop behind them. Sometimes the narrow end of the tool is needed to achieve the same purpose.
ACT1039

Purple Hard Card

A

This card is by far the most resistant to deformation and melting when used with a heat gun. Nearly every installer now working with very heavy gauge auto safety films knows that, because of their mass, these films store more heat for a longer time. Dragging or pushing a hard card over such hot film that is being heat-formed can readily begin to melt or deform it. This new card can stand up to the job like no other, even the former champion, the Gold Hard Card (ACT1020).
SQUEEGEES - HANDLED TYPE saplı ragleler
ACT1200

18½" (47cm) Yellow Turbo Squeegee With Tube Handle

A

Economy size squeegee usually cut to shorter 4-5" lengths before use. Used for removal of application solution during the installation process.
ACT1201

28" (71cm) Black Smoothie Without Handle

A

Squeegee tool used for glass cleaning. Economy size usually cut to shorter 4-5" lengths before use. Not recommended for installation of films.
ACT1202

4" (10cm) Black Smoothie Tube Squeegee

 

A,F

Squeegee tool used for glass cleaning. Not recommended for installation of films. Sometimes called the "Smoothie."
ACT1203

5½" (14cm) Yellow Turbo Squeegee

A

Used for removal of application solution during the installation process.
ACT1204

8" (15cm) Flat Foot Pro Squeegee Blade

F

Used for heavy gauge safety film installation (similar to ACT1206) as a radical new design to remove application solutions from beneath the film during the installation of all film types. Flattened edge is applied to surface of 11-15 mil films. 
ACT1206 (6")

ACT1207 (8")

6" (15cm) Power Squeegee

8" (20cm) Power Squeegee

F

A "finishing" (installation) squeegee as a ready-to-use assembly. Used to remove application solution from beneath the film during the installation of all film types. 6" version recommended for safety/security films, 4 mil and thicker.
ACT1208

8" (20cm) Silver Security Squeegee

F

A "finishing" (installation) squeegee as a ready-to-use assembly. Very good for safety film installations. (Always remember, though, to never use a finishing squeegee as a cleaning squeegee, or a cleaning squeegee for a finishing squeegee. A hard, sharp edge must be maintained for installing film. Cleaning dirty glass will rapidly dull these high-durometer blades. )
ACT1209

9" (23cm) Black Smoothie Tube Squeegee

F

Squeegee tool used for glass cleaning. Not recommended for installation of films.
ACT1210

Blue Power Max Squeegee With Handle

Blade inserts sold seperately

A,F

A "finishing" (installation) squeegee as a ready-to-use assembly. Uses ACT1305 (Blue Max auto squeegee) and Unger Pro handle. Blue Max has pre-trimmed, angled sides for more effective squeegeeing into corners and along top edges of glass. (Always remember, though, to never use a finishing squeegee as a cleaning squeegee, or a cleaning squeegee for a finishing squeegee. A hard, sharp edge must be maintained for installing film. Cleaning dirty glass will rapidly dull these high-durometer blades.) Note the angled left and right sides of the squeegee blade. Replacement blades will need to be likewise cut (as in ACT1305).
ACT1213 Blue

ACT1214 Red

ACT1216 Yellow

Power Stroke (Blue) (Hard 96A)

Power Stroke (Red) (Hard 93A)

Power Stroke (Yellow) (Firm 90A)


White color is not available

A

Three color-coded squeegees of different durometers. Designed to fit into Pro-Unger ACT1218 handle. Edge sharpness maintained by rubbing squarely on sanding block. In order of increasing hardness: Yellow (90A), red (93A), blue (96A).
ACT1217

Super Clear Power Max Squeegee with Handle

Blade inserts sold seperately

A,F

A "finishing" (installation) squeegee as a ready-to-use assembly. Uses ACT1318 (Clear Max squeegee) and Unger Pro handle. Clear Max has pre-trimmed, angled sides for more effective squeegeeing into corners and along top edges of glass. (Always remember, though, to never use a finishing squeegee as a cleaning squeegee, or a cleaning squeegee for a finishing squeegee. A hard, sharp edge must be maintained for installing film. Cleaning dirty glass will rapidly dull these high-durometer blades. )
ACT1218

Unger Pro Handle

A,F

This rubber-coated squeegee handle works with many different squeegee blade attachments: Clear Max, Blue Max, Blue Max Blade, and of course the regular squeegee blade with the soft rubber insert (for glass prep) in the stainless steel channels (ACT1311-1314). Essential tool for glass cleaning and for using the special higher durometer finishing squeegee blades.
ACT1221

Side Swiper (Without Blade)

Blade inserts sold seperately

A,F

The MUST-HAVE handled squeegee for stroking auto film down along the sides and bottom edges of rear windows with ease and power. Exquisite ergonomic design. Super for reaching behind the speakers. Used primarily for auto film installation, this tool is now also being used for hard-to-reach areas in flat glass installation. Replaceable 6" Blue Max Blade (ACT1309) sold separately. How have we installers survived without this tool?
ACT1224

Performax Handle
Blade inserts sold seperately

A,F

This is the long-awaited "super" handle with adjustable jaws for use with a large array of squeegee blades and with any standard-thread handle extensions (such as broom handles or paint roller extensions). For automotive installations use the Blue Max Auto Squeegee Blade (ACT1305). For architectural installations use the NEW Blue Maxx Squared Blade (ACT1319).
ACT1225

Bulldozer I — Automotive

A

Designed to quickly squeegee down film behind speakers, brake lights, and along the bottom edges of hard-to-reach, low-angle, rear windows. No more knuckle-scraping. Tool dimensions: 15 x 38 cm.
ACT1226
Bulldozer II — Flat Glass

 

F

This flat squeegee tool is intended for film installation in difficult-to-reach areas, giving you all the leverage you need for reaching behind pillars, or far overhead. This flat glass version of the Bulldozer Squeegee has a reinforced rib design on the back side for extra rigidity and leverage. Tool dimensions: 15 x 38 cm. Click image detailed view, and note the reinforced rib design on the back side for extra rigidity and leverage.
ACT1229

3½" (9cm) Crusher  Squeegee Handle

Blade inserts sold seperately

A

Superb heavy-duty squeegee handle with foam grip for auto installation. Orange Crush blade ACT1323 not included. Excellent for maximum solution extraction for sputtered and safety film installation. Handle is used for Thor's Hammer Jr., for 7 mil+ auto safety film installation.
KNIVES AND BLADES olfa maket bıçağı
ACT0608

Olfa Silver SVR-1

A,F

Used for film pattern cutting and trimming. Use only stainless steel blades with breakaway points to minimize likelihood of glass scratching.
ACT0609

Olfa Stainless Steel Blades
(50 pack)

A,F

Replacement blades for standard installation knife (ATC0603, 604, 605, 608, 610, 613). Stainless steel blades must be used to avoid or reduce the risk of scratching glass. Remember to always use low cutting angles when cutting on glass surfaces.
ACT0610

Olfa SVR-2 Auto Lock Knife

A,F

The "Auto-Lock" SVR-2 is significantly improved over the older version of the "Olfa Silver." Now features right- or left-handed use, blade position auto-lock, stainless steel channel, and one-segment click-action. We strongly recommend either this or the Pro A-1 knife below for optimum professional results.
ACT0611

Plastic Razor Blades
(100 pack)

A

These plastic razor blades are excellent for remove adhesive and bits of old film from sensitive glass surfaces to help avoid damage to rear window defroster elements.
ACT0612

Plastic Utility Knife

A,F

Used for film pattern cutting and trimming. Use only stainless steel blades with breakaway points to minimize likelihood of glass scratching.
SQUEEGEE REPLACEMENT PARTS ragle lastikleri
ACT1302

18½" (47cm) Yellow Turbo Blade

A

Economy size squeegee usually cut to shorter lengths of 4-5". Used for removal of application solution during the installation process.
ACT1303

18" (46cm) Squeegee Blade

A,F

Replacement rubber blade for Unger Pro channel
ACT1304 


 

6" (15cm) Flat Foot Pro Squeegee Blade

F

Used for heavy gauge safety film installation (similar to ACT1206) as a radical new design to remove application solutions from beneath the film during the installation of all film types. Flattened edge is applied to surface of 11-15 mil films.
ACT1305

Blue Max Auto Squeegee Blade

A,F

Excellent as finishing a squeegee in automotive and flat-glass applications, especially for sputtered films. Harder than ACT1318, this tool is superior for water evacuation on films requiring maximum water removal, though not as effective on severely compound curved glass because of its greater rigidity. Installers generally cut off left & right sides at an angle (as shown in photo) to allow leading edge to better squeegee into corners (See ACT1210, ACT1217). For automotive applications, many installers therefore prefer the Clear Max squeegee, especially on curved glass..
ACT1309 (6")

ACT1310 (8")

ACT1306 (12" )

ACT1308 (18")

ACT1307 (144")

6" (15cm) Blue Max Squeegee Blade

8" (20cm) Blue Max Squeegee Blade

12" (30cm) Blue Max Squeegee Blade

18" (46cm) Blue Max Squeegee Blade

144" (366cm) Blue Max Squeegee Blade

GT118.JPG (1628 bytes)

A,F

Used in the ACT1313 & ACT1314 (Unger Pro 6" & 8" stainless steel channel) as a finishing squeegee for maximum water removal. For use on safety, sputtered, and other slow drying, "high-tech" films. Use this squeegee blade in the Unger Pro handle ACT1218. 6" length rated best among many professionals for rapid, uniform evacuation of application solution on flat glass with minimum hand and wrist fatigue. Note that the blade has 4 (four!) usable edges to maintain excellent edge sharpness. Recommended for safety / security films, 4-6 mils in thickness. Preferred by many professionals for safety film installations, with a 6" optimum width for maximum psi application pressure.
ACT1313 (6")

ACT1314 (8")

ACT1311 (12")

ACT1312 (18")

 

 

6" (15cm) Squeegee & Channel Without Handle

8" (20cm) Squeegee & Channel Without Handle

12" (30cm) Squeegee & Channel Without Handle

18" (46cm) Squeegee & Channel Without Handle

A,F

Stainless steel channel and soft rubber squeegee blade insert for use with the Unger Pro Handle (ACT1218). The 8-12" lengths are ideal for most residential/ commercial window films installations. Used in the glass cleaning process and in the final cleanup after the actual film installation to remove soap streaks or smudges. The 8" length channel can be cut with a hacksaw into 2 four-inch lengths, the ideal length for automotive use.
ACT1315
8" (20cm) Silver Security Squeegee Blade

F

Replacement blade to ACT1208 used as a means of removing application solutions from beneath the film during the installation of all film types. Also used, cut to half its length, in "Thor's Hammer, Jr" for auto safety film installation.
ACT1316 (6")

ACT1317 (8")

6" (15cm) Pro Squeegee Blade

8" (20cm) Pro Squeegee Blade

F

Replacement blade to ACT1206/ACT1207 used as a means of removing application solutions from beneath the film during the installation of all film types.
ACT1318

Super Clear Max Squeegee

A,F

Excellent as finishing squeegee tool; high durometer, yet flexible. For mounting inside in the Unger Pro handle. More flexible than the ACT1305 Blue Max auto squeegee. Has beveled leading edge for excellent flush mounting. Installers generally cut off left & right sides at an angle to allow leading edge to better squeegee into corners. (See ACT1210, ACT1217)
ACT1319

5" (13cm) Blue Max "Squared"

F

New for November 2004. Squared-off version of the Blue Max auto squeegee (no bevel). For use in the Performax Squeegee Handle ACT1224 for thicker gauge safety/security films.
ACT1320

42" Black Replacement Blade ACT1301 (140")

 

A,F

Replacement rubber blade for Pro Unger squeegee channel (ACT1311-1314), used for window cleaning, not installation. Very economical: buy in these longer lengths, cut pieces to desired length.
MEASURES / TEMPLATES ŞABLONLAR
ACT0200

12" (30cm) Triangle 45° /90° With Circle Template

A

Aluminum triangles are useful for their short, straight edges in finishing out the pre-trim process on a glass table. The holes are useful as trim guides for cutting precise holes in film to fit cleanly around circular hinge bolts and other hardware found on movable vent wings and swing-out rear quarter windows.
ACT0202

8" (20cm) Triangle 30° /60° With Circle Template

 

A

Aluminum triangles are useful for their short, straight edges in finishing out the pre-trim process on a glass table. The holes are useful as trim guides for cutting precise holes in film to fit cleanly around circular hinge bolts and other hardware found on movable vent wings and swing-out rear quarter windows.

ACT0203 (18")

ACT0204 (36")

18" (46cm) Straight Ruler
36" (91cm) Straight Ruler

A,F,P

These aluminum straight edges permit straight cuts on glass cutting boards and are also useful for creating the splices on large commercial panes when "butt-splicing" is required to yield a relatively seamless appearance.
ACT0212 (25'/8m)
25' (8 meter) Heavy Duty Tape Measure in IMP and Metric Units (inches and centimeters)

A,F,P

Inches and centimeters scale: Heavy duty retractable tape measure, essential for residential, commercial, and automotive window measurements.
SPRAYERS AND PARTS SU POMPALARI
ACT0400

Poly II Sprayer 2 Qt (2 liter)

A,F,P

Generally used for residential/commercial installations, this pressurized spray bottle holds ½ gallon (nearly 2 liters) and reduces "finger-fatigue," eliminating the need for pumping while spraying via a simple trigger. Handy for large windows and long-duration sprays. Has adjustable spray nozzle.
ACT0406

32 oz. Trigger for Adjustable Spray Pump

A,F,P

Heavy-duty spray-head for attachment to 32 oz. spray bottles.
ACT0409

32 oz. Empty Bottle ACT0409

A,F,P

General purpose, unmarked spray bottle for use with Adjustable Spray Pump (Trigger) ACT0405. Sometimes professional installers will use a unique or special solution for a specific purpose, such an alcohol/water solution for final window polishing after an installation. An unmarked bottle will clearly be recognized as such, or custom labeled as desired.
ACT0426

2 Qt (2 liter) Hand-Held Impact Pressure Sprayer

A,F,P

Generally used for residential/commercial installations, this pressurized spray bottle holds ½ gallon (nearly 2 liters) and reduces "finger-fatigue," eliminating the need for pumping while spraying via a simple trigger. Handy for large windows and long-duration sprays. Has adjustable spray nozzle.
ACT0428

Hand-Held Pressure Sprayer (2 Qt 2 liter)

A,F,P

Smaller and lighter weight than the ACT0426, the hand held sprayer is excellent for auto use or on small commercial jobs. Unique design allows high pressure to be retained without the use of a pressure governor.
INSTALLATION PREPARATION CHEMICALS film uygulama kimyasalları
ACT0500

Dirt-Off Concentrate with Dispenser
1 Quart (1 liter)

A,P

Used for interior automotive window cleaning and dot matrix prep. Far superior to regular detergents for removing oily deposits on automotive glass. This diluted solution of Dirt-Off can also be used as an adhesive "accelerant" to instantly give additional tack to the film in the dot matrix areas of rear windows. After the normal installation of a rear window, carefully peel down the film from the dot matrix area and spray in a heavy mist of Dirt-Off. Squeegee out normally; then use your Teflon "hard-card" (wrapped in a towel or a layer of your nylon scrub pad covered with a layer of paper towel or cotton cloth) to apply extra pressure outward to the film edge.

Dispenser ejects 7.5 milliliters per pump. Desired concentration measurement options:

a. 4 pumps per quart (liter) of pure water.
b. 30 ml per liter of water.
c. 1 ounce per quart.

1 qt = 0.946 liters

ACT0502

Film Adhesive Remover-Pink
1 Gallon (3.8 liters)

A

Used to soften adhesives left behind on the glass surface for easier removal with a scrub pad.
ACT0503 Film Guard 19 oz. (Window Film Cleaner)

A,F

Film Guard is highly recommended for use after an installation as cleaner and silicone base polish for film surfaces. Helps to reduce friction between film and rubber gaskets on side roll-up windows and prevent condensation (works as an anti-fogging agent).
ACT0504

Film-On Concentrate with Dispenser
1 Quart (1 liter)

A,F,P

Application solution concentrate for films with pressure sensitive mounting adhesive (generally automotive type films). May also be used with CDF mounting adhesive films where there may be a special need to use a pH neutral application solution (to avoid etching marble surfaces or to install special products such as sputtered copper films, low-e films, etc.). Comes with dispenser pump for measured dilution control. Follow label instructions carefully.

Dispenser ejects 1 milliliter (ml) per pump. Desired concentration measurement options:

a. 3-5 pumps per quart (liter) of pure water.
b. 1 teaspoon per quart.
c. 3-5 ml per liter.

1 qt = 0.946 liters

ACT0505 Hi Sheen Window Glass Cleaner (19oz)

A,F

Foaming action glass cleaner. Non-streaking.
ACT0510 Sprayway Adhesive Remover

A

Aerosol spray application used to soften adhesives left behind on the glass surface for easier removal with a scrub pad. (This product should be used with extreme caution. Damage to paints, finishes, and glazing can occur.)
ACT0511 Sprayway Glass Cleaner

A,F

Ammonia free, film-friendly aerosol spray cleaner used for cleaning film surfaces after installation. Alcohol based, slight mint fragrance.
ACT0512

X-100 Slip-EEZ
1 Gallon (3.8 liters)

 

F

Cleaning and application solution concentrate for most CDF adhesive films. Follow dilution instructions. Mild acid content makes it a vastly superior cleaning agent for oil/grease/dirt contaminated glass than conventional detergents. Also serves as an adhesive promoter for CDF-adhesive films, though it must not be used 1) with copper films, 2) with silver-based low-e films, 3) in situations where marble sills or floors may suffer slight acid etching. Always used appropriate dropcloths.
INSTALLATION TOOLS oto cam filmi araç filmi uygulama aparatları
ACT0700

Gasket Wizard Set

A

This device is used to carefully pull back rub rails for easy film-to-glass installations below the rub rail. Rub rails are located at the base of all automotive door window glass and are used for weatherproofing the openings between the glass and the door structure. Many installers find the Gasket Wizard helpful, even without the use of the bungee cords.
ACT0701

Heat Gun (Wagner Brand)

A

Standard economy model two-setting (hi-lo temp) heat gun for auto film heat forming.
ACT0702

Hook Pulling Tool

A

The hook tool, if used, must be used very carefully. It is handy to readily remove rear brake lights that are friction-mounted on rear decks.
ACT0703

Int'l Tool Apron
(Tools not included.)

A,F

Used by professionals to have at one’s side all the tools essential for installation. 
ACT0704

Jiffy Steamer

1 Gallon (3.8liter) Capacity

A

Used to help with the removal of films with PS adhesive from tempered glass, this customized professional steamer has extra hose length and a brass tip that does not come with the standard steamer from Jiffy. Remember: use this steamer ONLY on tempered glass for rapid film removal. Annealed or laminated glass is susceptible to thermal breakage.
SCRAPER BLADES cam güvenlik filmi kazıma bıçakları
ACT0800

1" (2.5cm) Single Edge Carbon Steel Blades
(100 pack)

A,F

Razor blades can be used alone or with ACT0900 AND ACT0901for necessary glass cleaning / scraping. Note that these blades are not stainless steel and are therefore susceptible to rusting with use.
ACT0801

1" (2.5cm) Single Edge  Stainless Steel Blades
(100 pack)

A,F

Razor blades can be used alone or with ACT0900 AND ACT0901 for necessary glass cleaning / scraping. Stainless steel blades are more durable, will not rust, and are less likely to damage glass.
ACT0802

3" (8cm) Carbon Steel Triumph Blades
(25 pack) 

A,F

Replacement blades for ACT0902.
ACT0803

4" (10cm) Scraper Blades
(10 pack)

F

Replacement blades for ACT0904 and ACT0903.
ACT0804

4" (10cm) Scraper Blades
(100 pack)

F

Replacement blades for ACT0903 and ACT0904.
ACT0805

6" (15cm) Heavy Duty Triumph Blades
(10 pack)

F

Replacement blades for ACT0906 or ACT0905. Heavier gauge blades for those more difficult film removal jobs.
ACT0806

6" (15cm) Triumph Carbon Steel  Blades
(25 pack)

F

Replacement blades for ACT0906.
ACT0807

6" (15cm) Triumph Stainless Steel Blades
(25 pack)
gt108-1.jpg (113350 bytes)

F

Replacement blades for ACT0906. Stainless steel blades are more durable, will not rust, and are less likely to damage glass. Well worth the slight extra cost.
SCRAPERS cam filmi kazıma aparatları
ACT0900

1" (2.5cm) Blade Aide

 

A,F

This scraper uses standard single-edged razor blades where small blades are needed for film or other glass contaminant removal. Basically serves as a holder for better gripping. Safety feature allows blade to be reversed for storage. (Use with ACT0801)
ACT0901

1" (2.5 cm) Heavy Duty Razor Scraper

A,F

This scraper uses single-edged razor blades (ACT0801). Excellent for safety, grip strength, and maximum leverage where small blades are needed for film or other glass contaminant removal.
ACT0902

3" (8 cm) Triumph Scraper

A,F

Smaller version of ACT0906; very handy for smaller windows. Works better than the 6" Triumph for automotive film removal on side windows. Best used on residential applications for smaller windows. Extremely efficient. Highly recommended. (Use with ACT0802)
ACT0903

4" (10 cm) Scraper with 11" (28cm) Handle

F

More powerful/effective than the ACT0906 (6" Triumph Scraper) at removing existing window film. Longer handle provides extra leverage for difficult film removal jobs. Always remember to remove or reverse blade and use safety cover when not in use. (Use with ACT0804)
ACT0904

4" (10cm) Scraper with 6" (15cm) Handle

F

More powerful/effective than the ACT0906 (6" Triumph Scraper) at removing existing window film. Effective for tougher film removal jobs, and relatively compact in size. Always remember to remove or reverse blade and use safety cover when not in use. (Use with ACT0803)
ACT0905

6" (15cm) Red Heavy Duty Triumph Scraper

 

F

Heavy Duty Scraper used in the first phase of glass preparation, especially in old film removal. Not for automotive use because of its blade length and inability to conform of compound-curved glass. (Use with ACT0805)
ACT0906

6" (15cm) Triumph Scraper MK II

 

F

The standard scraper used in the first phase of virtually all flat glass preparation. Not for automotive use because of its blade length and inability to conform of compound-curved glass. Light weight, easy to use, and extremely efficient at removing contaminants. Absolutely essential tool for all flat glass installers. Use ACT0904 to strip old film first, and then use this scraper for final window preparation (& adhesive removal). Use with ACT0807.
ACT0907

6" (15cm) Triumph with Angled Handle

 

F

Preferred by some installers for better attack angle when cleaning glass and removing old film or decals. Use with ACT0807.
ACT0908


 

6" (15cm) Triumph with Slide Cover

 

F

Known as the "Triumph 2000," this variation of the Triumph has all the features of the standard ACT0906 but now has a built-in protective cover that can be operated with a flick of the thumb. No more fumbling with a separate blade cover. Safer and more convenient, especially when doing ladder work. Great for regular window cleaning, but not recommended for stripping off old film. (Use with ACT0807)
ACT0909

Clip Scraper 
(Extension Scraper)

A

Razor blade scraper extension tool for reaching down in tight places, such as the bottom edges of a rear window. Great tool for film removal in these out-of-reach places. Use caution when handling! Remove blade or reverse blade when not in use! NOTE: In stead of a blade, you can also use this tool to grip a Teflon edge tool (White, Black, or Gold) for that difficult hard-carding along the bottom edge of rear windows!
MARK AND TRIM TOOLS işaretleme ve kırpma
ACT1101

White 5-Way Tool (Trim Guide)

F

This important tool is used as a trim guide to aid in the cutting of clean, uniform borders along the perimeters of straight-edged windows. Many installers find the Teflon edge tool equally effective and perhaps more convenient than this larger tool, though both do the job of providing a clean edge trim while shielding the window frame (be it made of wood, rubber or glazier’s putty). Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener.
ACT1102

Yellow Film Marker

A,F

Handy for 3 basic purposes: 1) marking film prior to installation of windows with unusual shapes (arches, trapezoids, etc.) which must be cut to approximate shape before the final "lay-up;" 2) circling a contaminant (hair or fiber) before pulling back the film to remove it; 3) marking film edges to check for glass movement on side roll-ups during the trimming process. Yellow grease mark easily wipes away.
CT1106

Film Opaquer Pen-Broad Point

A

Used by installers to hide large mistakes in trimming which cause excess light intrusion at film edge. Considered by the seasoned installer as a last minute "artist's brush" or "cheater's pen" depending on whether he is using it vs. someone else. In art supply stores, you may also purchase enamel paint markers, excellent for this purpose as well.
ACT1107

Film Opaquer Pen-Thin Point

A

Used by installers to hide fine line mistakes in trimming which cause excess light intrusion at film edge. Considered by the seasoned installer as a last minute/last resort "savior" or "cheater's pen," depending on whether he is using it or someone else.
PAINT PROTECTION FILM TOOLS kaput filmi uygulama aparatları
ACT0610

Olfa SVR-2 Auto Lock Knife

A,F,P

The "Auto-Lock" SVR-2 is significantly improved over the older version of the "Olfa Silver." Now features right- or left-handed use, blade position auto-lock, stainless steel channel, and one-segment click-action. We strongly recommend either this or the Pro A-1 knife below for optimum professional results. Used for cutting professional urethane film from patterns on glass top tables. Remember: never cut film on auto body surfaces!
ACT1510

Black "WetorDry" Squeegee for PPF installation

A

An outstanding new tool that is getting rave reviews, this squeegee is probably going to be the new standard recommended squeegee for installing paint protection film. It has great flexibility, moderately soft durometer, and its size is similar to a Blue or Black Teflon card (2¾ x 4¼” or about 7 x 11cm). This “WetorDry” squeegee has eight usable edges that contour smoothly to car body surfaces to more effectively remove application solution—without marking the urethane surface. In field testing, it has received the highest recommendation from PPF installers.
ACT1030

Blue Teflon Card

A,P

This soft Teflon Card is an ideal tool for the installation of of Ventureshield Paint Protection Film. Use firm drag strokes at a very low angle for maximum moisture extraction and quick tack without damaging the soft urethane film. Can be cut easily to narrower widths as desired.
ACT1032

Green Squeegee (Soft)
PPF Pattern-Making

A,P

An ideal tool for applying PPF pattern-making transfer paper to auto body surfaces to enhance the accuracy of special patterns.
ACT0302

 

 

6"x10" (15x25cm) White Scrub Pad

(Sold individually.)

A,F,P

These nylon pads are a critically important element in the cleaning painted body surfaces in preparation for urethane film installation. Always keep the pad and the car body surface wet with soapy water and X-100 (or alcohol) solution. Pads can be cut down into 4 pads at convenient 3" x 5" sizes.
ACT0406

32 oz. Trigger for Adjustable Spray Pump

A,F,P

Heavy-duty spray-head for attachment to 32 oz. spray bottles. You'll need two of these sprayer heads for Paint Protection Film installation (one each for your Film-On and Dirt-Off bottles).
ACT0409

32 oz. Empty Bottle ACT0409

A,F,P

General purpose, unmarked spray bottle for use with Adjustable Spray Pump (Trigger) ACT0406. Sometimes professional installers will use a unique or special solution for a specific purpose, such an alcohol+Film-On to strip paint surfaces of wax prior to urethane film installation. An unmarked bottle will clearly be recognized as different from Film-On or Dirt-Off bottles and can be custom labeled as desired.
ACT0504

Film-On Concentrate with Dispenser
1 Quart (1 liter)

A,F,P

Application solution concentrate for automotive and urethane films with pressure sensitive mounting adhesive. Comes with dispenser pump for measured dilution control. Follow label instructions carefully.

Dispenser ejects 1 milliliter (ml) per pump. Desired concentration measurement options:

a. 3-5 pumps per quart (liter) of pure water.
b. 1 teaspoon per quart.
c. 3-5 ml per liter.

1 qt = 0.946 liters

ACT0500

Dirt-Off Concentrate with Dispenser
1 Quart (1 liter)

A,F,P

For PPF application to preparation painted surfaces and as an adhesive accelerant to improve tack time on curved body surfaces.

Dispenser ejects 7.5 milliliters per pump. Desired concentration measurement options:

a. 4 pumps per quart (liter) of pure water.
b. 30 ml per liter of water.
c. 1 ounce per quart.

1 qt = 0.946 liters

ACT0203 (18")

ACT0204 (36")

18" (46cm) Straight Ruler

36" (91cm) Straight Ruler

A,F,P

These aluminum straight edges permit straight cuts on glass cutting boards.

SALES AIDS / METERS film ölçüm cihazları

ACT1400


 

Digital BTU Meter

 

A,F

This wide spectrum (300-1050 nm) digital meter measures solar radiant energy intensity directly transmitted thru glass (or the film-glass combination) in units of BTUs per square foot per hour or watts per square foot. Effective tool showing the relative effectiveness of various films in blocking solar radiant heat. Especially useful for showing how a very dark dyed film may allow far more energy to pass thru than a much lighter metallic film.
ACT1404

 

 

Merlin Laser Gauge

 

merlin1sm.JPG (1844 bytes)
Click here for detail view (1650 bytes)

F

Extremely useful for measuring glass thicknesses in monolithic or IG units, the thicknesses of air gaps in IG units, determining whether glass is laminated, and which surfaces have low-e or other reflective coatings. MERLIN WEBSITE

 

ACT1405

Meter Carrying Case

A,F

Make sure to protect your investments! This case can be modified, through addition or removal of special inserts, to accommodate several various-sized meters. (Meters not included.)
ACT1406

Metric Conversion Strip for Merlin Laser Gauge  

F

 
ACT1408

TGI: Toughened Glass Indicator

 

F

Powerful & important, this pocket-sized tool is for the flat glass market, used to determine which, if any, panes in window unit are heat-treated. Knowing this allows use of films that would otherwise be inappropriate on regular annealed glass. Full set of user instructions with device. MERLIN WEBSITE
ACT1410

Heat Lamp Unit

 

A,F

250 watt (red) infrared heat lamp with metal cage, for solar simulation.

ACT1411

Low-E Detector

 

A,F

The ETEKT line of LOW-E Coating instruments has become the industry standard for detecting the presence and location of thermal resistant coatings (LOW-E) used on energy efficient single and dual lite glass and window assemblies. The ETEKTs are rugged, handheld instruments that are accurate, easy to use, and never require calibration. Place the unit flat on the glass surface, press the button and read the results. The ETEKTs are powered by a 9-volt alkaline battery (included).

The meters can be used to test for LOW-E coatings in sealed Insulating Glass (IG) assemblies. No more destructive testing to determine if the invisible LOW-E coating has been correctly applied and installed in your IG windows.
ACT1415

Solar BTU Meter

 

 

A,F

This wide spectrum photo cell (sensitive to both the visible and infrared bands of the solar spectrum) measures solar radiant energy intensity directly transmitted thru glass (or the film-glass combination) in units of BTUs per square foot per hour or watts per square meter. Effective tool showing the relative effectiveness of various films in blocking solar radiant heat. Especially useful for showing how a very dark dyed film may allow far more energy to pass thru than a much lighter metallized film.
ACT1417


 

Digital UV Meter

(UV Transmission and Power Meter)

 

A,F

This meter gives UV transmission percentages (320-385nm), UV power, and temperature. The ACT1417 is the most versatile product available for measuring UV.

You can measure UV intensities (irradiance), UV Transmission %, and temperature in Fahrenheit and Celsius. Unlike other UV products on the market, the ACT1417 is extremely simple to operate. The digital display is continually updated with real-time readings. Make an IMPACT with your sales presentations by illustrating the UV blocking capabilities of your product. Convincingly answer questions for that doubting customer. The ACT1417 is powered by a 9 volt battery (included).

ACT1420

UV Light Source Lamp

A,F

A portable UV lamp, the ACT1420 helps demonstrate how films block ultraviolet light. It’s a perfect compliment to our digital UV Meter (ACT1417). Adds a the professional look to your demonstrations and is a great sales tool. EXCELLENT FOR CUSTOMER DEMOS
ACT1421


 

VLT and Power Meter

 

A,F

The ACT1421 shows the performance of your film, identifies coatings and film, and proves to your customer that your product reduces fading by controlling visible light. It calculates visible light transmission percentages, power readings (W/m2), measures visible light spectrum (400-700 NM), and includes a digital thermometer in Centigrade and Fahrenheit. The digital display is continually updated with real-time readings, allowing the user to take readings continuously. The ACT1421 is powered by a 9-volt battery (included) and uses an end-mount sensor to take measurements.

ACT1422

Pocket Detective Meter (VLT and VLR)

A,F

Essential to measure compliance with auto tint laws regulating visible light transmission and reflection, this new meter is capable of accurately  metering both! Complete kit comes in foam-lined plastic storage case. Replaces ACT1413. For full details on this must-have new device, click the link to the user's  manual below.

 

Price List

LLumar
Solargard
Solarmaster

TINT TOOLS HOME

SQUEEGEES

KNIVES & BLADES

HANDLED TYPE SQUEEGEES

SQUEEGEES REPLACEMENT PARTS

MEASURES & TEMPLATES

SPRAYERS & PARTS

INSTALLATION CHEMICALS

INSTALLATION TOOLS

SCRAPERS

SCRAPER BLADES

MARK & TRIM TOOLS

PPF TOOLS

SALES AIDS & METERS