Window Tinting Film Tools / Outils de Film de Fenêtre / Attrezzi Della Pellicola Della Finestra / Fensterfilmwerkzeuge
Herramientas de la Película de la Ventana / Ferramentas da Película da Janela / Cam Filmi Uygulama Aletleri

Tint Tools

Tool Code

Name

Photo

(Click on the Picture)

Auto(A)

Flat Glass(F)

Paint Protection (P)


Description

INSTALLATION PREPARATION CHEMICALS film uygulama kimyasalları
ACT0500

Dirt-Off Concentrate with Dispenser
1 Quart (1 liter)

A,P

Used for interior automotive window cleaning and dot matrix prep. Far superior to regular detergents for removing oily deposits on automotive glass. This diluted solution of Dirt-Off can also be used as an adhesive "accelerant" to instantly give additional tack to the film in the dot matrix areas of rear windows. After the normal installation of a rear window, carefully peel down the film from the dot matrix area and spray in a heavy mist of Dirt-Off. Squeegee out normally; then use your Teflon "hard-card" (wrapped in a towel or a layer of your nylon scrub pad covered with a layer of paper towel or cotton cloth) to apply extra pressure outward to the film edge.

Dispenser ejects 7.5 milliliters per pump. Desired concentration measurement options:

a. 4 pumps per quart (liter) of pure water.
b. 30 ml per liter of water.
c. 1 ounce per quart.

1 qt = 0.946 liters

ACT0502

Film Adhesive Remover-Pink
1 Gallon (3.8 liters)

A

Used to soften adhesives left behind on the glass surface for easier removal with a scrub pad.
ACT0503 Film Guard 19 oz. (Window Film Cleaner)

A,F

Film Guard is highly recommended for use after an installation as cleaner and silicone base polish for film surfaces. Helps to reduce friction between film and rubber gaskets on side roll-up windows and prevent condensation (works as an anti-fogging agent).
ACT0504

Film-On Concentrate with Dispenser
1 Quart (1 liter)

A,F,P

Application solution concentrate for films with pressure sensitive mounting adhesive (generally automotive type films). May also be used with CDF mounting adhesive films where there may be a special need to use a pH neutral application solution (to avoid etching marble surfaces or to install special products such as sputtered copper films, low-e films, etc.). Comes with dispenser pump for measured dilution control. Follow label instructions carefully.

Dispenser ejects 1 milliliter (ml) per pump. Desired concentration measurement options:

a. 3-5 pumps per quart (liter) of pure water.
b. 1 teaspoon per quart.
c. 3-5 ml per liter.

1 qt = 0.946 liters

ACT0505 Hi Sheen Window Glass Cleaner (19oz)

A,F

Foaming action glass cleaner. Non-streaking.
ACT0510 Sprayway Adhesive Remover

A

Aerosol spray application used to soften adhesives left behind on the glass surface for easier removal with a scrub pad. (This product should be used with extreme caution. Damage to paints, finishes, and glazing can occur.)
ACT0511 Sprayway Glass Cleaner

A,F

Ammonia free, film-friendly aerosol spray cleaner used for cleaning film surfaces after installation. Alcohol based, slight mint fragrance.
ACT0512

X-100 Slip-EEZ
1 Gallon (3.8 liters)

 

F

Cleaning and application solution concentrate for most CDF adhesive films. Follow dilution instructions. Mild acid content makes it a vastly superior cleaning agent for oil/grease/dirt contaminated glass than conventional detergents. Also serves as an adhesive promoter for CDF-adhesive films, though it must not be used 1) with copper films, 2) with silver-based low-e films, 3) in situations where marble sills or floors may suffer slight acid etching. Always used appropriate dropcloths.

Price List

LLumar
Solargard
Solarmaster

TINT TOOLS HOME

SQUEEGEES

KNIVES & BLADES

HANDLED TYPE SQUEEGEES

SQUEEGEES REPLACEMENT PARTS

MEASURES & TEMPLATES

SPRAYERS & PARTS

INSTALLATION CHEMICALS

INSTALLATION TOOLS

SCRAPERS

SCRAPER BLADES

MARK & TRIM TOOLS

PPF TOOLS

SALES AIDS & METERS